Milli SAT H LM comprises a fully integrated (including BUC and Modem), a fully ruggedized terminal that is optimized for all applications and is ideal for demanding environments, such as in helicopters, boats, and vehicles.
Milli SAT H LM is optimized for larger bandwidth requirements with a minimal footprint. Provides autonomous operation to transmit and receive bandwidth data rates at more than 20 Mbps.
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
RF Performance | Ka Band | Ku Band |
---|---|---|
Tx Frequency | 29-31 OR 27.5-30 GHz | 13.75-14.5 OR 12.75-13.25 Ghz |
Rx Frequency | 19.2-21.2 OR 17.5-20 GHz | 10.75-12.75 OR 10.75-11.75 GHz |
Max G/T | 11 dB / K | 7 dB / K |
Polarization | RHCP/LHCP (co-pol / cross-pol) | Linear (V/H) Automatic Skew Control |
EIRP | 48.2 dBW (25w BUC) | 45.6 dBW (50w BUC) |
Panel Size | 25 x 27cm (9.8 x 10.6") | 25 x 27cm (9.8 x 10.6") |
Azimuth | Continues coverage over full 360° | Continues coverage over full 360° |
Elevation | -8° to 90° | -8° to 90° |
Control Technique | Combined IMU / RSSI / GPS (Optional) | Combined IMU / RSSI / GPS (Optional) |
Velocity | Azimuth >200° / Sec, Elevation > 200° / Sec | Azimuth >200° / Sec, Elevation > 200° / Sec |
Initial Acquisition Time | <30 sec | <30 sec |
Re-Acquisition time | <100ms | <100ms |
Management | Web Interface/ Open AMIP 1.16/ SW ICD | Web Interface/ Open AMIP 1.16/ SW ICD |
Power Input | 24-36v DC | 24-36v DC |
Power Consumption | 25w (Rx), 200W (25W BUC, pSAT) | 25w (Rx), 250W (50W BUC, pSAT) |
Interfaces | RS-232, Ethernet, TX / RX | RS-232, Ethernet, TX / RX |
Weight | 14.2 Kg (31.3lb) | 14.7 Kg (32.4lb) |
System Size | 39.5 x 39.5 cm (15.5 x 15.5") | 39.5 x 39.5 cm (15.5 x 15.5") |